SYD-0705C Compacted Asphalt Mixture Density Tester

Product Information

The SYD-0705C compacted asphalt mixture density tester is designed and manufactured based on the industry standard JTGE20-2011 "Test Procedures for Asphalt and Asphalt Mixtures in Highway Engineering" of the People's Republic of China, with T 0705-2011 "Compacted Asphalt Mixture Density Test (Dry Method)" as the main basis, taking into account the requirements specified in T0706-2011 "Compacted Asphalt Mixture Density Test (Water Weight Method)" and T 0707-2011 "Compacted Asphalt Mixture Density Test (Wax Sealing Method)".

Product Features:

1. This instrument is versatile and can simultaneously meet the requirements of the dry method, water weight method, wax sealing method, and volume method for weighing samples in the industry standard JTG E20-2011 "Test Code for Asphalt and Asphalt Mixtures in Highway Engineering" of the People's Republic of China. It can then calculate the corresponding density or relative density.

2. This instrument uses a microcomputer to control the temperature of the water bath, with high temperature control accuracy, easy operation, simplicity, and reliability.

3. This instrument adopts a high-precision electronic balance, with a large measurement range, high measurement accuracy, and stable and reliable operation.

4. The overflow water tank of this instrument is made of stainless steel material, which is durable and easy to clean.

5. This instrument adopts an electric lifting mechanism and a new type of push rod motor, which works smoothly and has low noise. Can effectively reduce the workload of experimenters.

6. The motor lifting mechanism comes with upper and lower limit detection, and automatically stops when it reaches the limit point. It can effectively avoid motor system failures caused by human operation errors.

7. This instrument table is made of 304 stainless steel material, which is beautiful and practical, providing a stable working platform for electronic scales.

Main technical parameters:

1. Inner tank size: 530 * 400 * 380mm. Effective capacity of the middle bath: 420 * 400 * 300mm (approximately 50L)

2. Refrigeration compressor power: 300W;

3. Electric heating tube power: 1.3kW;

4. Circulating water pump flow rate: 10L/min;

5. Electronic balance (balance is an optional accessory, and the appearance may vary according to customer requirements)

Maximum weighing: 15 kg:

Weighing sensitivity: 0.1g;

6. Temperature control accuracy of water bath: (25 ± 0.2) ℃;

7. Working power supply: AC (220 ± 10%) V, 50Hz;

8. Whole machine power consumption: not exceeding 2500W;

9. Dimensions: 950 mmx705 mmx1250mm (length x width x height (controller)).

10. Packaging size and gross weight: 1045x825 x1400mm 200kg.