Aggregate weak particle analyzer

Product Information

Detailed information on the aggregate weak particle tester: The aggregate weak particle tester is used to determine the content of weak particles in crushed stone, gravel, and broken gravel. Apply loads of 0.15kN, 0.25kN, and 0.34kN according to particle size, and the broken particles are considered weak particles. Discard them and weigh the mass of the unbroken particles.

Main technical parameters

1. Power supply: 220V

2. Zui low speed: 400 ± 40 revolutions per minute

3. Maximum speed: 600 ± 60 revolutions per minute

4. Impeller diameter: 75 ± 10mm

5. Number of impellers: 4

6. Beaker capacity: 1000mL