DT-6 Building Materials Flammability Test Furnace

Product Information

The touch screen controlled building material flammability testing furnace adopts a stainless steel box body and adopts touch screen control method. The sample can be controlled and automatically lifted, and the built-in lamp can be adjusted back and forth. It automatically ignites and timing, and can freely store 500 pieces of data according to user needs. It is a high configuration building material combustion level testing instrument produced in accordance with the national standard GB8626-2007. (The red part represents the parameters that are now mandatory for third-party testing units to accept).

The flammability test furnace for building materials is used to directly impact vertically placed samples with a small flame in a normal combustion environment to determine the flammability of building products. The flammability test furnace for building materials utilizes the Kleinbrenner principle from Germany to measure the combustion performance of B-grade building materials under direct impact of a small flame in the vertical direction (i.e. used for determining the combustion performance/flame retardant level of building materials at B-grade).

Applicable standard: ISO11925-2:2002E "Test Method for Flammability of Building Materials".

The substrate for this experiment is selected according to EN13238.

The results of this experiment are only related to the performance of the sample of the product under specific test conditions and cannot be used as the sole basis for evaluating the potential fire hazard of the product in actual use.

Product Features:

1. The operation design conforms to ergonomics, and all experiments are completed through touch screen operation, with a high degree of automation. It can store previous test results, access previous test data, and has a maximum storage space of 500 records.

2. Apply a flame (ls~999.9s) to the sample for 0.5s, which can be adjusted arbitrarily at 1s/h.

3. Record the status of the sample and the time when the flame reaches the 150mm mark.

4. Mix two ignition methods.

5. Each sample can provide up to 6 control tests.

6. The sample holder is driven by a stepper motor for controllable and automatic lifting.

7. The burner can be manually adjusted from left to right and back.

8.2 Tempered heat-resistant glass door with double angle observation test, (with lock) convenient and practical.

9. The high-pressure igniter automatically ignites, and the flame height can be manually adjusted through a precision control valve.

Main technical parameters:

1. The operation design conforms to ergonomics, and all experiments are completed through touch screen operation, with a high degree of automation. It can store previous test results and retrieve previous test data.

2. The stepper motor drives the controllable automatic lifting of the sample holder.

3. The main light can be adjusted back and forth.

4. 1.5mm stainless steel plate box body.

5. Two tempered heat-resistant glass doors with double angle observation and testing, double (with lock) convenient and practical.

6. High voltage automatic ignition, durable combustion.

7. The ignition source can automatically tilt 45 degrees and be vertical.

8. The flame height is adjusted through a precision control valve.

9. The sample holder can be moved up and down, as well as forward and backward.

10. Equipped with two types of sample racks.

11. Flame measuring ruler.

12. High degree of automation, precise experimental data, and easy operation.

13. Sample size: 250mm × 90mm × 60mm

14. Box material: 1.5mm stainless steel.

15. The bottom of the box is a flat natural ventilation opening, which is composed of 5cm × 5cm square ventilation openings (a true 1.5mm thick steel plate ventilation opening, 50mm high) to maintain smooth airflow.

16. Exquisite workmanship, truly solder free process

17. Touch screen display: Seven inch color touch screen

18. Wind speed device (optional)

19. Box size: 970 × 460 × 950

20. Net weight: 52 kilograms