AQM-ZW-A safety helmet UV pre-treatment box

Product Information

Produced according to GB/T2812-2006 and GB 2811-2019 safety helmets, mainly used for UV pre-treatment testing of safety helmets. Widely used in special labor protection equipment supervision and inspection stations, building science research institutes, and construction engineering quality inspection stations. This product uses the ultraviolet irradiation (method A) specified in the specifications, using a 450W short pulse high-pressure xenon lamp to pre treat and irradiate the safety helmet at a distance of 150mm and an ambient temperature not exceeding 60 ℃.

Product Features:

1. Main structure: The inner container is made of stainless steel, and the outer shell is coated with dual color electrostatic spraying. Chao's large test chamber is equipped with 16 sets of rotatable safety helmet sample clips, ensuring that 16 safety helmets can be completed in a single test.

2. Temperature measurement system: High temperature sensors are used for real-time testing and monitoring of the test temperature.

3. Equipped with a timing circuit, conduct a maximum of 999 hours of timed testing.

4. Sample holder: Adopting a polygonal spherical distribution structure to ensure that the distance between all hats and the lamp is the same. Using a rotatable clamp bracket, install the sample by rotating 360 ° in place. Overcoming the drawbacks of fixed style clips requiring installation in different locations, opening doors on both sides, and occupying a large area.

5. Light source system: Using a branded 450W short pulse high-pressure xenon lamp, with minimal light decay during its lifespan.

6. Control system: Real time display of temperature, time and other related information for testing and operation control at any time.

7. Cooling system: Adopting an air-cooled cooling system with "lower air inlet and upper air outlet". Zhuan uses a fan to ensure that external wind energy flows uniformly through the surface of the xenon lamp and the interior of the test chamber, ensuring that it does not exceed the standard requirement of 60 ℃ and extending the service life of internal components.

Main technical parameters

1. Power supply voltage: AC220V ± 10%/50HZ, power: 500W

2. UV irradiation source: Short pulse high-pressure xenon lamp, 220V, 450W

3. Cooling method: air-cooled

4. Timing range: 0-999 hours.

5. Temperature display temperature: 0.1 ℃

6. Number of pre processed safety helmets: 1-14.

7. Distance between safety helmet and lamp: 150mm

8. Size and net quantity: 1060 * 1225 * 1360mm 150kg

9. Packaging size and gross weight: 1360 * 1350 * 1500mm 170kg