TSZ-3A strain controlled triaxial apparatus (3T)

Product Description | Product Description

The TSZ-3A strain controlled triaxial apparatus is used to measure the strength and deformation characteristics of samples under axial static load conditions. The instrument can perform triaxial tests on unconsolidated undrained shear (UU), consolidated undrained shear (CU), and consolidated drained shear (CD). This instrument has a high confining pressure, compact structure, simple operation, and does not require an air compressor or nitrogen cylinder. It can meet the requirements of geotechnical testing for large-scale civil engineering projects such as high-rise buildings and dams.

Technical Parameters

1. Test piece size: diameter 39.1mm × 80mm, diameter 61.8mm × 125mm

2. Load: Maximum load 30kN

3. Workbench travel: 0-90mm

4. Shear rate: 0.001-4.800 mm/min

5. Surrounding pressure: 0-2000Mpa

6. Reverse pressure: 0-1.000Mpa

7. Pore pressure: 0-2000Mpa

8. Volume change: 0-50ml Minimum division: 0.1ml

9. Power supply: 220V ± 10%, 50HZ

10. Power: less than 800W

Note: The cutting rate of a can be infinitely adjusted throughout the entire range, and the high-resolution full-color LCD screen displays the speed and motor status in real time

The measurement accuracy of confining pressure, back pressure, and pore pressure (hereinafter referred to as pore pressure) can reach 0.001Mpa, and real-time display of confining pressure and back pressure can be automatically controlled on the ultra large touch screen with adjustable control accuracy, up to 0.001Mpa